article: Q
Crystal
0.00UAH m / n
Applicable topcoat thickness 35 µm
Polyamide for buildings based on a cycloaliphatic resin provides very good performance in terms of flexibilty, wear and UV resistance. It has better resistance to scratching than standard polyesters and also has very a good ratio between flexibility and hardness. Developed for high build systems. It is usually applied with 15 µm primer. It has excellent corrosion and UV radiation resistance, and belongs in categories RUV4 and RC4.
- High level of UV resistance: RUV 4
- Medium level of corrosion resistance: RC 4
- Coating thickness (topcoat + primer µm): 25 + 15
- Flexibility (max. T-bend): 1,5
- Adhesion (cross-cut test): 0
- Impact test (J): ≥ 20
- Mek test (DR): >100
- Scratch resistance (kg): ≥ 2,5
- Surface: no scratches
Typical properties:
UV resistance
Corrosion resistance
Urban area
Industrial area
Rural area
Coastal area
Gloss
Hardness
Interior environment
Colors
Areas of application:
Roof
Interior
RAL colors
Standard
Similar products
article: GL
- High level of UV resistance: RUV 3
- Medium level of corrosion resistance: RC 3
- Coating thickness (topcoat + primer µm): 20+5, 15+5
- Flexibility (max. T-bend): 3.0-3.5
- Adhesion (cross-cut test): 0-1
- Impact test (J): ≥ 10
- Mek test (DR): >100
- Scratch resistance (kg): ≥ 1.0
- Surface: no scratches
article: MT
- High level of UV resistance: RUV 3
- Medium level of corrosion resistance: RC 3
- Coating thickness (topcoat + primer µm): 20 + 5, 20 + 15, 25 + 25
- Flexibility (max. T-bend): 2,5-3,5
- Adhesion (cross-cut test): 0
- Impact test (J): ≥ 20
- Mek test (DR): >100
- Scratch resistance (kg): ≥ 1.5
- Surface: no scratches
article: MT2x
- High level of UV resistance: RUV 3
- Medium level of corrosion resistance: RC 3
- Coating thickness (topcoat + primer µm): 20 + 5, 20 + 15, 25 + 25
- Flexibility (max. T-bend): 2,5-3,5
- Adhesion (cross-cut test): 0
- Impact test (J): ≥ 20
- Mek test (DR): >100
- Scratch resistance (kg): ≥ 1.5
- Surface: no scratches
article: UMT
- High level of UV resistance: RUV 3-4
- Medium level of corrosion resistance: RC 3-4
- Coating thickness (topcoat + primer µm): 20 + 15, 25 + 15, 25 + 25
- Flexibility (max. T-bend): 1,5
- Adhesion (cross-cut test): 0
- Impact test (J): ≥ 20
- Mek test (DR): >100
- Scratch resistance (kg): ≥ 1.5
- Surface: no scratches
article: DECO
- High level of UV resistance: RUV 3
- Medium level of corrosion resistance: RC 3
- Coating thickness (topcoat + primer µm): 20 + 5, 20 + 15, 25 + 25
- Flexibility (max. T-bend): 2,5-3,0
- Adhesion (cross-cut test): 0
- Impact test (J): ≥ 10
- Mek test (DR): >100
- Scratch resistance (kg): ≥ 1.5
- Surface: no scratches
article: PUR
- High level of UV resistance: RUV 4
- Medium level of corrosion resistance: RC 4
- Coating thickness (topcoat + primer µm): 20 + 15, 25 + 15
- Flexibility (max. T-bend): 1,5
- Adhesion (cross-cut test): 0
- Impact test (J): ≥ 20
- Mek test (DR): >100
- Scratch resistance (kg): ≥ 2,5
- Surface: no scratches
article: Q
- High level of UV resistance: RUV 4
- Medium level of corrosion resistance: RC 4
- Coating thickness (topcoat + primer µm): 25 + 15
- Flexibility (max. T-bend): 1,5
- Adhesion (cross-cut test): 0
- Impact test (J): ≥ 20
- Mek test (DR): >100
- Scratch resistance (kg): ≥ 2,5
- Surface: no scratches
article: HB
- High level of UV resistance: RUV 4
- Medium level of corrosion resistance: RC 4
- Coating thickness (topcoat + primer µm): 20 + 15, 25 + 10, 25 + 25
- Flexibility (max. T-bend): 1,5
- Adhesion (cross-cut test): 0
- Impact test (J): ≥ 20
- Mek test (DR): >100
- Scratch resistance (kg): ≥ 2
- Surface: no scratches
article: PVDF
- High level of UV resistance: RUV 4
- Medium level of corrosion resistance: RC 4
- Coating thickness (topcoat + primer µm): 23 + 5, 20
- Flexibility (max. T-bend): 2,0
- Adhesion (cross-cut test): 0-1
- Impact test (J): ≥ 20
- Mek test (DR): >100
- Scratch resistance (kg): ≥ 2,5
- Surface: no scratches